VxWorks 6: Networking

Learn about network support for your VxWorks targets, implement your own protocol, and use networking with your VxWorks Simulator.

Subscribe

About this course

The course examines how Wind River® VxWorks® Simulator can be used to model targets connected by networks. You will see how to set up networks within a single host as well as how to communicate from that internal host network to the outside networks and to other networks on other hosts.

Based on: VxWorks 6.9
Applicable for: All VxWorks 6

Curriculum3 hr 7 min

  • Networking with VxWorks Simulator
  • VxWorks Simulator 0 hr 12 min
  • Networking a Simulator by Redirection 0 hr 7 min
  • Creating a VxWorks Simulator Network on the Host 0 hr 16 min
  • Accessing the VxWorks Simulator Network from an External Network 0 hr 10 min
  • Using Multiple Hosts 0 hr 5 min
  • IPv6 0 hr 6 min
  • Task Guide: Commonly Used Command Line Parameters 0 hr 3 min
  • Conclusion 0 hr 1 min
  • Using the VxWorks MUX Layer to Implement Your Own Protocol
  • MUX Layer 0 hr 23 min
  • Creating Test Setup 0 hr 9 min
  • Preview
    Binding a Protocol 0 hr 7 min
  • Transmitting Packets 0 hr 14 min
  • Receiving Packets 0 hr 2 min
  • Simple Ping-pong Protocol 0 hr 4 min
  • Optimization 0 hr 6 min
  • Exploring the VxWorks Stack Memory Management
  • Overview/Memory Cache and Slab Buffer 0 hr 10 min
  • IPCOM Packet Descriptor 0 hr 8 min
  • CPU Caches 0 hr 2 min
  • “ipnet_ctrl” Command 0 hr 4 min
  • M_BLK and netBufLib 0 hr 11 min
  • M-blk Buffer Allocation 0 hr 11 min
  • Legacy Network Stack Pools 0 hr 1 min
  • Conclusion 0 hr 1 min
  • Ask an Expert

About this course

The course examines how Wind River® VxWorks® Simulator can be used to model targets connected by networks. You will see how to set up networks within a single host as well as how to communicate from that internal host network to the outside networks and to other networks on other hosts.

Based on: VxWorks 6.9
Applicable for: All VxWorks 6

Curriculum3 hr 7 min

  • Networking with VxWorks Simulator
  • VxWorks Simulator 0 hr 12 min
  • Networking a Simulator by Redirection 0 hr 7 min
  • Creating a VxWorks Simulator Network on the Host 0 hr 16 min
  • Accessing the VxWorks Simulator Network from an External Network 0 hr 10 min
  • Using Multiple Hosts 0 hr 5 min
  • IPv6 0 hr 6 min
  • Task Guide: Commonly Used Command Line Parameters 0 hr 3 min
  • Conclusion 0 hr 1 min
  • Using the VxWorks MUX Layer to Implement Your Own Protocol
  • MUX Layer 0 hr 23 min
  • Creating Test Setup 0 hr 9 min
  • Preview
    Binding a Protocol 0 hr 7 min
  • Transmitting Packets 0 hr 14 min
  • Receiving Packets 0 hr 2 min
  • Simple Ping-pong Protocol 0 hr 4 min
  • Optimization 0 hr 6 min
  • Exploring the VxWorks Stack Memory Management
  • Overview/Memory Cache and Slab Buffer 0 hr 10 min
  • IPCOM Packet Descriptor 0 hr 8 min
  • CPU Caches 0 hr 2 min
  • “ipnet_ctrl” Command 0 hr 4 min
  • M_BLK and netBufLib 0 hr 11 min
  • M-blk Buffer Allocation 0 hr 11 min
  • Legacy Network Stack Pools 0 hr 1 min
  • Conclusion 0 hr 1 min
  • Ask an Expert